| |
|
| |
| CAN'T FIND IT? |
|
| If you don’t see what you need, click below to learn about custom Slip Ring Assemblies |
|
 Custom Assembly |
|
| |
| MORE QUESTIONS? |
|
| Still have questions? Submit a General Inquiry to Engineering Department for answers |
|
| General Inquiry |
|
| |
| S - 300 | | Electrical Characteristics | | Ambient Temp. Range: | -35C to +55C | | Rated Speed: | 7.5 RPM Non Continuous | | Rated Voltage: | 240 V RMS, 120 VDC | | Rated Current: | 5@15 Amps, 30@5 Amps | | Surge Current: | 15 Amps | | Curcuit Resistance: | <0.10 MilliOhms | | Circuit Insulation: | <5mA@600 V RMS | | | | | Mechanical Characteristics | | Shaft End Play: | <0.05" with 8 lb Thrust Load | | Drag Torque: | <30 oz-in with 8 lb Thrust Load | | Number of Circuits: | Figure shown has 35 circuits | | Number of Brushes/Circuits: | 2 Minimum | | Total Weight: | <10 lbs (for unit shown) | | Life: | 90,000 Hours @ 5rpm | | Dimensions are in inches | | | | | Construction Characteristics | | Frame: | Totally Enclosed | | Hardware: | Cad Plated or Stainless Steel | | Housing : | Aluminum Alloy, Anodize per Mil-A-8625 | | Bearings: | Single Shielded, Lubricated per Mil-G-23827 | | Rotor: | Aluminum Alloy, Anodize per Mil-A-8625 | | Rings: | Silver 90%, Copper 10% | | Insulation: | Fungus Inert per Mil-Std-454 | | Brush Block: | Replaceable Type | | Brushes: | Silver 80%, Graphite 20% | | Rotor Connections: | Custom built (Conduits to connectors) | | Stator Connections: | Custom Built (Conduits to Connectors or 4-40 UNC studs) | | | 
 | | | | | | | |
|
