 |
|
 |
|
 |
|
Electrical Characteristics
AMBIENT TEMP. RANGE : -35 C to +55 C
RATED SPEED: 7.5 RPM Non Continuous
RATED VOLTAGE: 240 V RMS, 120 VDC
RATED CURRENT: 5@15 Amps, 30@5 Amps
SURGE CURRENT: 15 Amps
CIRCUIT RESISTANCE: < 0.10 MilliOhms
CIRCUIT INSULATION: < 5mA@600 V RMS
Mechanical Characteristics
SHAFT END PLAY: < 0.05" with 8 Lb Thrust Load
DRAG TORQUE: < 30 oz-in with 9 Lb Thrust Load
NO OF CIRCUITS: Figure 5A has 35 Circuits
NO OF BRUSHES/CIRCUITS: 2 Minimum
TOTAL WEIGHT: < 10 Lbs (for unit shown)
LIFE: 90,000 Hours @ 5 rpm
DIMENSIONS ARE IN INCHES
Construction Characteristics
FRAME: Totally Enclosed
HARDWARE: Cad plated or Stainless Steel
HOUSING: Aluminum Alloy, Anodize per Mil-A-8625
BEARINGS: Single Shielded, Lubricated per Mil-G-23827
ROTOR: Aluminum Alloy, Anodize per Mil-A-8625
RINGS: Silver 90%, Copper 10%
INSULATION: Fungus Inert per Mil-Std-454
BRUSH BLOCK: Replaceable Type
BRUSHES: Silver 80%, Graphite 20%
ROTOR CONNECTION: Custom Built (Conduits to connectors)
STATOR CONNECTIONS: Custom Built (Conduits to connectors or 4-40 UNC studs)
|
| |
|
|
|
|
