| |
|
| |
| CAN'T FIND IT? |
|
| If you don’t see what you need, click below to learn about custom Slip Ring Assemblies |
|
 Custom Assembly |
|
| |
| MORE QUESTIONS? |
|
| Still have questions? Submit a General Inquiry to Engineering Department for answers |
|
| General Inquiry |
|
| |
| E - 100 | | Slip Ring assemblies in general are custom manufactured, but not all Slip Ring assemblies are specially designed and constructed. The side Figure and Table shows a Slip Ring assembly that is both cost effective and has a short lead time. Our open E-100 series provides excellent reliability and performance at a reasonable price. These assemblies offer low noise and current carrying capacity to 40 amperes. The E-100 series can be combined and assembled in almost limitless ways to meet your requirements, using standard Slip Ring components developed by Danmar Industries over the past 40 years. | 
 | | | Mechanical | | 1. | Rings: | Coin Silver or Brass Silver Plated | | 2. | Brushes: | Spring loaded silver graphite. Two per ring | | 3. | Speed: | 150 rmp maximum | | 4. | Life: | 1000 hrs@100 rpm | | 5. | Insulation: | Phenolic | | 6. | Dielectric Strength: | 750 VRMS (all combinations) | | 7. | Insulation Resistance: | 100 Meg-Ohms at 500 V.D.C. | | | DIMENSIONS ARE IN INCHES. | | | | | Model | No. of Rings | Dim.A | Model | No. of Rings | Dim.A | | E-100-5 | 5 | 4.900 | E-100-20 | 20 | 7.715 | | E-100-10 | 10 | 5.555 | E-100-25 | 25 | 7.950 | | E-100-15 | 15 | 6.400 | E-100-40 | 40 | 10.300 | | Figure Above | | 12.168 | E-100-52 | 52 | 12.168 | | | | | | | |
|
