Slip Ring assemblies in general are custom manufactured, but not all Slip Ring assemblies are specially designed and constructed. Our E-100 series shows a Slip Ring assembly that is both cost effective and of short lead time. It provides excellent reliability and performance at a reasonable price. These assemblies offer low noise and with current carrying capacity to 40 amperes. The E-100 series Slip Ring assemblies can be combined and assembled in almost limitless ways to meet your requirements, using standard Slip Ring components developed by Danmar Industries over the past 25 years.
Model Rings Length
E-100-5 5 4.900 inch
E-100-10 10 5.555
E-100-15 15 6.400
Dimension for unit in the picture   12.168
 
Model Rings Length
E-100-20 20 7.715 inch
E-100-25 25 7.950
E-100-40 40 10.300
E-100-52 52 12.168
 
MECHANICAL

1. RINGS : Coin Silver
2. BRUSHES : Spring loaded silver graphite. Two per ring
3. SPEED : 150 rpm maximum
4. LIFE : 1000 hrs @ 100 rpm
5. INSULATION : Phenolic
6. VOLTAGE : 350 V.A.C ? 500 V.D.C
7. INSULATION RESISTANCE : 100 Meg-Ohms Min. at 500 V.D.C
 
 
 
 
 
 
 
 
Email: danmarind@aol.com   11952 Challenger Court   Moorpark, CA 93021   Phone: (805) 529-3788   Fax: (805) 529-3837